2-5mmMesh welding line XF-25-1250

2-5mmMesh welding line XF-2/5-1250 (Automatic wire mesh welding production line)
Description:
The mesh welding line is especially for the production line that line wire is from spool and cross wire from pre-straightened and cut bar.
Parameter:
Welded wire mesh machine is a kind of auto welding equipment designed and manufactured by ourselves based on absorbing the advanced electromechanical controlled resistance welding technology from home and abroad, of which multinomial technologies have won the national patents.
Our welded wire mesh machine has the following major advantage:
1. Main machine frame is welded with the thicker steel panel and steel bar. The main structure is more well-set and compact.
2. The cross wire feeding hopper is originative. The cross wire feeding is automatic and driven by step motor, which makes the cross wire aligning more accurate.
3. The mesh pulling system is controlled by step motor, which makes the pulling mesh aperture more standard and accurate.
4. The mesh aperture size welded is diversified. The line wire spacing can be adjusted through the related parts. The cross wire spacing adjusting is controlled by microcomputer and it can have 10 different styles.
5. Welding adopts late-model efficient welding transformer. The voltage adjusting range is big and it can fall into eight different grades, which enlarge the range of wire diameter size.

6. In order to adapt the capacity of the clients’ main power transformer and reduce the rush of the current, electric and electronic welding control adopt the separating control electricity input, i.e., the welding transformers don’t work at the same time but in several times when welding the same row of cross wires.

Main parameters:

Model	ABE-2/5-1250
Mesh width	1250mm
Line wire spacing	50-100mm
Numbers of welding points	30
Transformer	3*125KVA
Cross wire spacing	50-200mm
Wire diameter	2-5mm
Max welding speed	30-40 strokes per min
Driving Power	2.2KW
Outside transformer capacity	≥100KVA
Outside cable requirement	Three 50 m2 copper wires (Equipment is distant from electric transformer≤100 m) One 20 m2 aluminum wire (used as zero line)
Welding way	Resistance welding controlled by Silicon-controlled rectifier (hereinafter called as SCR)
Welding voltage	Adjustable in eight different grades through welding transformer
Pressurizing way	By changing the length of tie rod in pressurizing beam and the compression of the upper electrode spring
Cross wire feeding way	The cross wire fall off the feeding hopper into welding automatically one by one driven by step motor
Wire material requirement	Coiled bar dragged annealing material shall meet the related requirements of carbon structural steel Q195F Carbon Equivalence of China GB/T701—1997, and the tensile strength shall be above or equal to 392N/mm². Surface shall be smooth and rustless, without lime removing agent, fume dirt, water stain, zinc stain (cold or hot galvanization) or altered drawing wire.